Curt Ball Mount with Sway Control Bracket, 3/4" Rise or 2" Drop

Curt Ball Mounts - D320

Ball mount with either a 3/4" rise or 2" drop comes with built-in bracket for sway control kit installation. Sway controls reduce side-to-side movement of trailer for better stability and safer towing.

Features:

• Provides either 3/4" rise or 2" drop
• Has built-in bracket for easy installation of Sway Control Kit (sold separately)

Specs:

• Fits 2" x 2" receiver hitch
• Requires ball with 1" shank diameter
• 8-1/4" from center of hitch pin hole to center of ball hole
• 3/4" rise from top of receiver opening to top of ball platform
• 2" drop from top of receiver opening to top of ball platform
• Towing capacity: 6,000 lbs
• Tongue weight capacity: 600 lbs

45820 Curt Ball Mount Sway Control

Customers compare D320 to these similar products

Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs$138.95

Customers Who Purchased This Ball Mounts Also Bought...

Pro Series Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch $54.95

Self Tapping Screw for Sway Control Ball Plate Assembly $0.95

Curt Sway Control Hitch Ball $6.09

Curt Friction Style Sway Control System $46.49

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional $124.95

Ask the Experts about this Curt Ball Mounts
Do you have a question about this Ball Mounts?

• Sway Control Bracket on Both Sides of a Ball Mount
  
• I am sorry, but the Curt Ball Mount with Sway Control Bracket, part # D320, is only offered with the sway control bracket on the right side. We do offer a Sway Control Tab, part # 3442, that you can weld onto a ball mount. Or, we also offer a Sway Control Adapter, Left Side, part # 3475, that can be used with a Round Bar weight distribution head.
  view full answer...


• Ball Mount with a Rise and Sway Control Bracket for a 2010 Toyota Tacoma
  
• On the trailer hitches we have installed on the same generation Toyota Tacoma as your 2010, the average height from the ground to the top of the receiver is 16-1/8 inches. One was a 2010 it was 18-1/4 inches. Based on these numbers you will need a ball mount with a rise between 6 and 8 inches. But you will want to measure from the ground to the top of the receiver opening on your hitch when parked on level ground to get the exact number you need to reach 24 inches. For a rise of 6-3/4 inches
  view full answer...


• How to Mount Sway Control Ball on Right Side of Ball Mount Used in Rise Position
  
• I do have a solution for you. Simply use a ball mount with the same rise, like part # 2923 along with a sway control tab, part # RP26003. The tab is placed on top of the ball mount once it is situated in the rise position, and is installed so that it is sandwiched between the trailer ball and the ball mount. We do not carry a ball mount that would have the tab on the right side when used in the rise position.
  view full answer...