Replacement Rubber Straps for Yakima Bike Racks with SwitchBlade Cradles (QTY 2)

Yakima Accessories and Parts - Y02412

Straps are replacement for Yakima SwitchBlade anti-sway cradles, found on most Yakima hitch and trunk mounted bike racks. Kit includes two replacement straps.

Features:

• Replaces damaged or worn straps on any Yakima SwitchBlade anti-sway cradles
• Stretches to secure bike to cradle
• Constructed of durable rubber

Specs:

• Quantity: 2
• Application: Yakima SwingDaddy, FlipSide, DoubleDown, BigHorn, QuickBack, KingJoe and SuperJoe bike racks
• Lifetime warranty

8002412 Replacement Chain Straps for Yakima SwitchBlade Cradles (QTY 2)

Customers compare Y02412 to these similar products

Rhode Gear Replacement Cradle Strap$9.00

Replacement Rubber Straps for Yakima BedRoc and Older Big Horn Models (Qty 2)$7.00

Replacement Rubber Strap for Thule T3 Bike Carrier Cradles$3.00

Softride Replacement Rubber Bike Straps - Set of 4$7.19

Softride Soft Velcro Tie Down for Bike Racks$1.79

Customers who look at this part also view

Yakima BigHorn 4 Bike Hitch Mounted Tilting Rack w Frame Mount Cradles for 2" Hitches$179.10

Customers Who Purchased This Accessories and Parts Also Bought...

Replacement Cradle for Yakima KingJoe Trunk Mounted Bike Carrier $9.00

Softride Soft Velcro Tie Down for Bike Racks $1.79

Replacement Strap for Cradles on Thule Apex and Vertex Bike Racks - Qty 1 $2.00

Replacement Square Nut for Thule M.O.A.B. Roof Mounted Cargo Carrier $0.50

Replacement Square Nut for DeWalt Contractor Series Ladder Racks or Thule Roof Mounted Bike Carriers $0.50

Ask the Experts about this Yakima Accessories and Parts
Do you have a question about this Accessories and Parts?

• Replacement Rubber Straps for Rhode Gear Shuttle Bike Racks
  
• I spoke with my contact at Yakima and found out that they bought part of the Rhode Gear line when they went out of business. We may be able to get you the correct replacement straps for your Shuttle rack but we will need the measurement of the holes in the straps on your bike rack. Yakima has a Fishbone strap, item # RGSUF1052, that may fit if your hole measurement is 1/2 inch. This strap fits most older Rhode Gear bike racks that do not have a strap that is integrated into the cradle.
  view full answer...


• Availability of Replacement Rubber Straps for Rhode Gear Super Shuttle Bike Rack
  
• We do offer a replacement Rhode Gear cradle strap, part # RGSUF1052. This strap has holes that are 1/2 inch in diameter, and it is designed to work with Prorack brand bike racks like the # PR8062403. It should also work on your Super Shuttle bike rack.
  view full answer...


• How Long are Yakima Replacement Rubber Straps # Y02412 and what is the Hole Diameter
  
• For the Replacement Rubber Straps for Yakima Bike Racks with SwitchBlade Cradles QTY 2, # Y02412, the holes are 1/2 inch in diameter and it is 9 inches long. These straps can be found on Yakima SwingDaddy, FlipSide, DoubleDown, BigHorn, QuickBack, KingJoe, and SuperJoe bike racks, or any Yakima bike rack that uses SwitchBlade anti-sway cradles.
  view full answer...


• Availability of Replacement Straps for a Rhode Gear Shuttle Bike Racks
  
• It sounds like you need the Rhode Gear Replacement Cradle Strap, # RGSUF1052. This strap fits the majority of older Rhode Gear bike racks that do not have a strap integrated into the cradle. This strap has 11 holes that are 1/2 inches each in diameter.
  view full answer...


• Replacement Cradle, Straps, and Mounting Hardware for a Yakima BedRoc Bike Racks
  
• We do have numerous replacement parts for Yakima bike racks. You will need Replacement Rubber Straps for Yakima BedRoc, # Y8820103. And for the mounting hardware, use Replacement Cradle Hardware, # Y8820104.
  view full answer...


• Replacement Rubber Straps needed for a Yakima 2 Inch Hitch Bike Rack
  
• The bike rack model name or part number would be a big help here, but I believe we have what you are looking for. I went out to the warehouse and got a set of the Replacement Rubber Straps for Yakima BedRoc and Older Big Horn Models, # Y8820103, and measured them for you, see photo. These straps are 7-3/4 inches long 1-1/4 inches wide and the holes in the straps are 3/4 inches diameter. Yakima also has the strap you mentioned which is 9 inches long, and has 1/2 inch Holes, item # Y02412,
  view full answer...


• Replacement Rubber Straps Needed for a Rhode Gear Bike Rack Cradle
  
• The most likely cradle strap for your Rhode Gear bike rack is the Rhode Gear Replacement Cradle Strap, # RGSUF1052. I have linked a photo with dimensions for you to determine if this is the correct strap for your rack. The next possibility is the SwitchBlade Cradle Strap, # Y02412, that you mentioned. I have added a photo for this strap also. Finally, some customers have found that their rack needs a strap with 3/4 inch holes in it. The Yakima BedRoc and Older Big Horn Straps, # Y8820103,
  view full answer...


• Replacement Cradle Strap for a Rhode Gear Bike Rack
  
• The closest replacement straps we have would be the Replacement Rubber Straps, # Y02412, that you have referenced. The slightly smaller hole diameter should not pose much of an issue since the rubber stretches. It might just take some extra muscle to pull it around a cradle knob. The only only Rhode Gear straps we have are # RGSUF1052, which is not as likely to fit as it has 11 holes over the Yakima 9 holes.
  view full answer...


• Attaching the Yakima Bike Rack Cradle Strap to a Cradle
  
• To attach the strap, # Y02412, to a cradle on a Yakima bike rack, start with the round end of the strap. The cradle will have mounting mounts for the strap located on the forward and rearward parts of the cradle. Start the hole at the end around one of the mounting points on the cradle and then pull, very hard, to stretch out the hole and pull the strap onto the mounting point on the cradle. Then, place the bike on the cradles like in the video I have linked. Pull the strap over the frame tub
  view full answer...


• Which Replacement Cradle is Needed For Rhode Gear Trunk Mounted Bike Rack
  
• The Rhode Gear Replacement Cradle, part # RG8890084, will fit on a 1-inch round tube arm. It is designed to fit the Rhode Gear Super Shuttle 3 Bike Rack, part # RG8015127, and the Rhode Gear Super Shuttle 2 Bike Rack, part # RG8015126. These are both trunk mount bike racks. The Rhode Gear Replacement Cradle, part # RG8890083, will fit the the 1-3/32 inch round tube arm. It is designed for the Rhode Gear Highway 2 Bike Carrier, part # RG8015220, and the Rhode Gear Highway 4 Bike Carrier, part
  view full answer...


• Replacement Rubber Cradle Strap for Rhode Gear Spare Tire Mount Bike Rack
  
• Thank you for providing a photo of the RhodeGear bike cradle strap you are looking to replace. The Yakima replacement rubber strap you were looking at, part # Y02412, is a set of two straps. Overall length tip-to-tip is 9 inches and hole diameter is 1/2 inch. We also offer a RhodeGear replacement strap, part # RGSUF1052. Please note this differs slightly in appearance to yours. This part is sold as a single strap that also measures 9 inches tip-to-tip with a hole diameter of 1/2 inch.
  view full answer...


• Availability of Replacement Rubber Straps for a Rhode Gear Bike Rack
  
• You may be able to use Rhode Gear Replacement Cradle Strap, # RGSUF1052. This strap has 11 holes that are 1/2 inch in diameter. This strap will work with some models of the Super Shuttle. You will need to measure to determine if it will fit. Due to the cradle and nub size on your Rhode Gear Rack, you will need to find straps for that specific make and model to ensure the bikes are held on without compromising safety. You may want to consider trying Velcro straps as an alternative. However, th
  view full answer...