Call 800-298-8924 to order Hopkins accessories and parts part number 38095 or order online at etrailer.com. Free expert support on all Hopkins products. Guaranteed Lowest Price and Fastest Shipping for Mag-Flat (TM) 4-Pole Mounting Magnet. Accessories and Parts reviews from real customers.
5.11
4.3349

Price: $5.11

Mag-Flat (TM) 4-Pole Mounting Magnet

Item # 38095

Our Price: $5.11

Orders above $99 qualify for free shipping

Shipping Weight: 0.12 lbs

Quantity: 

zoom in icon
zoom out icon
pop out icon replay 360 icon

Product Images

Hopkins Accessories and Part
Hopkins Accessories and Part
Hopkins Accessories and Part
Hopkins Accessories and Part

Customer Photos

Hopkins Accessories and Part

Videos


  • Wiring
  • Mounting Brackets
  • Hopkins
  • 4 Flat



Hopkins Accessories and Parts - 38095


4 Pole Trailer Wiring Mounting Magnet

Features:

  • Magnetic bracket protects 4-wire flat from harm
    • Keeps 4-pole flat trailer connector from dangling under vehicle
  • Strong magnet lets you mount light on metal surfaces
Product detail

Picture of the magnet on the back of the bracket.

Product detail

Product detail

48095 Mag-Flat (TM) 4-Pole Mounting Magnet

Replaces 38095







Video of Mag-Flat (TM) 4-Pole Mounting Magnet


Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.




Video Transcript for Hopkins Accessories and Parts 38095 Review

Today we're going to review part number 38095. This is the Hopkins Mag-Flat 4-way Mounting Magnet. You can see on this bracket there's a magnet on one side. Now this magnetic bracket will protect your 4-way flat from any damage or harm. Basically when you install your 4-way flat in here it'll keep the connector from dangling under your vehicle and getting scraped up or damaged. It does have this nice strong magnet here that attaches to any metal surface.

The way this would install, I'm going to show you here. You have the two clips on each side. If you just pull on one of them it releases it. Then you can pop the top half off just like that. You can pretty much see how it'll insert in here. I've got an example here.

Here's a 4-way connector. If you just lay this right in here and then just match up your. you can see one side has a curved side to it so you just match that up so they match up and then just push down on it with your 4-way in there. There you go. It's snaps in the ends to hold it into place and you can see your 4-way doesn't move around.

It holds it securely there. The wires come out the back and then you'll see you have your magnet here so basically what you can do with that is once you hook your 4-way at the back of your vehicle into this, just find a metal surface like your hitch or something and you can see it'll stick right on just like that. It keeps your 4-way up out of the way from dangling down on the ground or getting in the way. You just pop it right off, move it to another location. If you need to remove it again, just push down on one of these ends and it will release it and you can take your 4-way right out of there. That should do it for the review on part number 38095, the Hopkins Mag-Flat 4-way Mounting Magnet. .


Customer Reviews

Mag-Flat (TM) 4-Pole Mounting Magnet - 38095

Average Customer Rating:  4.3 out of 5 stars   (49 Customer Reviews)



- 38095

by: Rob09/08/2015


Clever alternative to the brackets I was considering for securing vehicle-side connector. Magnet is only strong enough to hold in the "on-top" position like in my picture though. If I needed it elsewhere I would try gluing in a couple of little rare-earth (i.e. really strong) magnets inside it. And I had to modify it, making a hole in the side for the connector's cover in order to fit the connector inside. (The product pictures on the web site actually have the connector outside the body of the device. When set up this way, with just the wires inside, I found there to be way too much wiggle.) 224477



- 38095

by: Mike W.05/27/2011


I've always fought with the connectors on my boat trailers. If disconnected and I moved the trailers, they would drag on the ground and get chewed up. If connected they could get wrapped around the ball. The mag-flat keeps the connector in place eliminating both issues. The only thing keeping this product from an excellent rating is that the magnet could be a bit stronger making a more secure mount to the frame. 15566



- 38095

by: Tim09/04/2013


I intend to use this on the connection for my trailer lights, to help keep the wires up and out of harms way. I was hoping the magnet was a bit stronger, it is a regular old magnet, not a super magnet, which in my opinion is what this product really needs to ensure that road vibration does not lead to the entire rig falling off. 98187



- 38095

by: Robert P09/06/2016


Calling e- trailer is like calling a friend, curtious , friendly , and aim to please. Haven't used any of the items from my order yet, I will shortly . The order was on time and wrapped so good nothing was damaged .I will definitely call e- trailer for my next order. 292065



- 38095

by: Don C.06/20/2014


Was looking for an easy way to mount the trailer wiring on the motorcycle. This Mag-Flat gizmo holds the four pin flat connection to the bottom of the luggage rack. Secure held in place but easily pulled loose to make connections. Solved my problem perfectly. 136858



- 38095

by: Michael M.08/18/2014


Just the type of things I needed. All work as described. Items shipped quickly and arrived intact. Just as an awareness, the Mag-Flat (TM) 4-Pole Mounting Magnet - 38095 does not create a waterproof enclosure. That didn't matter to me but may matter to others. 147157



- 38095

by: Bill K.02/24/2015


Decent price but pretty flimsy product. The magnet isn't very strong & the casing seems that it wont hold up to the elements very long. Great idea for the product but needs some work regarding quality. Also should have a knockout for sheathed cable. 175908



- 38095

by: Bruce08/18/2009


No bracket required! This product provides an excellent alternative to using a mounting bracket for a 4-flat connector. The connector can be hid behind the hitch when not in use for a cleaner look yet easily retrieved when needed. 2267



- 38095

by: Roger02/01/2013


I received the hitch last night and installed it by myself in 30-45 minutes. It was a perfect fit. The wiring was easy to install since the Santa Fe was pre wired for a tow package. Very satisfied with etrailer products. 64814



- 38095

by: Joe06/22/2010


needs stronger glue The idea was great and the magnet was strong enough to hold the wire up but the glue that holds the magnet wasn’t strong enough. The glue that holds the magnet gave way after only a month. 3160


Comments

thank you

comment by: Omar - 04/06/2015


10608



- 38095

by: Phil A.06/16/2009


Good idea, Weak magnet The item is a good idea overall however for holding the connector to my receiver the magnet os too weak. I often find my connection dangling after driving short distances. 1996



- 38095

by: Joe Broswick07/23/2014


Awesome little gadget. I like being able to hide the wires when they are not in use. However, I think the magnet should be a little bit stronger. Seems very week. Overall I like it. 142730



- 38095

by: Kevin z.12/23/2013


With a slight modification to the stock rubber connector on my 2013 jeep, this was just what I needed to keep my trailer harnes in place with my new after factory PSC bumpers 110887



- 38095

by: Terry S.06/04/2015


This mag-flat 4-pole mounting device works well. No drilling, just attach the magnet to the 4-pole wires and stick it to a metal part of the hitch. 200711



- 38095

by: John J.10/14/2013


Great Idea.... My plug was hard to get to and this item makes it easy. I live on a dirt road and with all the potholes, she still where I placed it. 103703



- 38095

by: mary v03/18/2015


Installed on one of my utility trailers the magnet holds very well. It is a great way to keep wires from dragging.I 'am pleased with purchase. 179497



- 38095

by: chris h06/20/2011


received producet in timely manner. Installed product it could us a stronger magnet I think but will have to see how it works out 17475



- 38095

by: WSRB05/10/2012


As others have noted, this does not have the strongest magnet. However, when set on top of the hitch I don't expect any issues. 39933



- 38095

by: Jess B.10/21/2012


Great product to keep the end of the 4pin wire from flopping around the rear of the vehicle. 57783



- 38095

by: Eric S.11/16/2015


Whether your trailer is hooked up or unhooked it's so nice to have the wiring plug secure. 232088



- 38095

by: b52agan06/28/2007


nice works OK , and easy to use 257


Comments

Still just what I needed. Still fits. Still holds. Thanks.

comment by: Larry H - 01/18/2015


8704



- 38095

by: Robert02/25/2017


Did the trick! Arrived quickly! Easy to use and secured my wiring easily! Thanks!! 345897



- 38095

by: Bryon_M06/30/2013


this thing is awesome. I hate that wire mess hanging down. this fixes that. 86840



- 38095

by: Ash06/23/2014


Had this working after I plugged this into my 97 Jeep Wrangler TJ in 10 min. 137230



- 38095

by: John12/31/2015


This little inexpensive bracket will come in handy. Great value! Thanks! 234597



- 38095

by: Tec06/04/2016


Great product. They should make it for 4 way wishbone plugs (5 wire) too. 257177



- 38095

by: Alan07/24/2012


You may have to shave the plastic of your wired connector to make it fit. 49198



- 38095

by: Chris C.05/10/2011


Works like a charm. No problems with it falling off the trailer hitch. 13201



- 38095

by: Richard C.08/11/2014


Simple device, works great. So much better then a dangling harness. 145656



- 38095

by: Brian D.07/14/2011


Great service, quick shipping and great tracking. Not installed yet. 19418



- 38095

by: Chip03/14/2011


Great communication and packaging of everything received. Thank you. 9336



- 38095

by: Ken R.11/11/2013


Great for securing magnetic light wire to vehichle and trailer. 106937



- 38095

by: Eddie H07/04/2014


Great little product. Did want to cut or drill factory cover. 139321



- 38095

by: Norton10/13/2013


Handy device. We'll see how well it stays in place. 103645



- 38095

by: Guenther03/19/2015


Fit nicely onto the OEM hitch of my Subaru Outback. 179749



- 38095

by: Ron L09/25/2016


Great product. I highly recommend it for use. 299759



- 38095

by: Larry C08/28/2013


Doesn't quite fit my plug, but I like the idea 97324



- 38095

by: Chris02/09/2017


Great way to hold the electrical flat p lug. 340155



- 38095

by: David J.09/29/2013


Great product. Great price. Fast delive ry. 101910



- 38095

by: Larry H.07/20/2013


Just what I needed. Fits. Holds. Thanks. 90690



- 38095

by: DeanW08/25/2016


Ok for now! Hope it holds up in winter! 287636



- 38095

by: RICH P.04/20/2012


MEDIOCRE MATERIALS BUT WILL DO THE JOB. 37870



- 38095

by: steve04/12/2012


good magnet could be stronger 36958



- 38095

by: Bob K04/21/2012


Nice innovative idea. 37964



- 38095

by: robert02/28/2013


Works as explained. 68131



- 38095

by: Wayne W02/24/2014


As Advertised. 117506



- 38095

by: Bill O11/12/2012


Works good. 59250



- 38095

by: Wendy B08/24/2012


Works great 52943



- 38095

by: Doru P.08/04/2016


Good. 279544

49
49


Ask the Experts about this Hopkins Accessories and Parts
Do you have a question about this Accessories and Part?


  • Parts Needed to Mount 4-Pole Trailer Connector on 2016 Ford Edge
  • A great solution for mounting a 4-pole wiring harness like Tekonsha # 118669 without having to drill into your bumper is to use a no-drill bracket like # TM75475 (short) or # 18136 (long) with the 4-pole bracket # TM76470. The no-drill brackets include a ring clamp that secures to your hitch tube. We also have a magnetic 4-pole mount, part # 38095.
    view full answer...

  • What Mounting Bracket For Wiring Harness Will Fit A Curt Hitch On A 2011 Kia Sorento
  • I have the Draw-Tite 4 and 5-Flat Trailer Connector Mounting Box, # 18145, that you can use to mount to the hitch or to the vehicle. You can store your 4-Way connector in this box. I also have the Hopkins Mag-Flat (TM) 4-Pole Mounting Magnet, # 38095, that is a magnet that will attach to any metal surface and holds the 4-Way connector. Also, the Tow Ready Mounting Bracket 4-Pole Flat, # 18144, is a 4-Way connector holder that will attach to the hitch or the bumper. If you did...
    view full answer...

  • Recommended Trailer Wiring Harness for a 2010 Hyundai Santa Fe with Factory Tow Package
  • For the 2010 Hyundai Santa Fe with the factory tow package, you would need the Custom Vehicle Wiring Harness, part # 118258. The harness would plug into the connector that is located underneath the vehicle inside the lower body panels on the driver side next to the muffler. I would also recommend a mounting bracket, part # 18144 or part # 38095, and it would be a good idea to use dielectric grease like part # 11755 between the connectors. The grease will protect the plugs from moisture...
    view full answer...

  • How To Attach The Tow Ready T-One Connector Wiring Harness # 118491 To The Vehicles Bumper
  • To attach the 4-Pole flat connector in the Tow Ready T-One Connector Wiring Harness, part # 118491 to your bumper, you will need to use a mounting bracket like the Tow Ready 4-Pole Flat Mounting Bracket, part # 18144. The bracket is 2-1/4 inches wide overall and comes with two self tapping screws and two Phillips head stove bolts and nuts. It can be attached to your bumper by drilling two holes and use the included self tapping screws. If you do not want to drill you can use the No-Drill...
    view full answer...

  • Trailer Wiring Harness Installation For a 1995 Chevrolet S-10 Pickup
  • If you have the bare wires that are connected to the vehicle lighting circuits, but just need the 4-Way connector, then you can use the Draw-Tite 4-Way Hardwire Kit, part # 18252, that you have referenced. This will tap into your loose wires and give you a 4-Way connector on the rear of your vehicle. To add a complete wiring harness and 4-Way trailer connector, you would need Tow Ready Custom Fit Vehicle Wiring, # 118312. I have included a link to the installation details below. To...
    view full answer...

  • Will the Connector Mounting Box Mount Directly to the Draw Tite Hitch # 75528 on a 2009 GMC Acadia
  • I went out to the warehouse and tested the fit of the 4 and 5-Flat Trailer Connector Mounting Box, item # 18145, with the Draw-Tite Max-Frame Class III Trailer Hitch Receiver, item # 75528, and it will not bolt up to the existing holes in the receivers electrical mounting bracket. The mounting holes in the Connector Mounting Box, item # 18145, are 4-1/2 inches on center, and the receivers electrical mounting bracket mounting holes are 2-1/4 inches and 1-3/4 inches apart on center. A...
    view full answer...

  • 4-Pole Trailer Wiring Harness for 2007 Ford Ranger
  • The 4-pole Hardwire Trailer Wiring Harness, part # 18252 is the correct wiring harness for your 2007 Ford Ranger. Although there is not a plug and play option available, the # 18252 is simple and straightforward to install. Simply locate the wiring harness behind the rear bumper that feeds the taillight assemblies. Have a helper activate the left turn signal, and use the included tester to pierce the insulation of each wire until you locate one that makes the tester blink. Then, tap...
    view full answer...

  • Mounting Bracket for Mounting Wiring to a Hitch
  • The part you were looking at, the 4 Pole Knock-Out Adapter, part # 30601, is only an adapter. You will need mounting brackets to mount your wiring to your vehicle. You can use the No-Drill Mount Bracket system, part # 18140 and part # 18144. My personal favorite is the Mag-Flat TM 4-Pole Mounting Magnet, part # 38095, but you will not be able to use the adapter, part # 30601 with the part # 38095, Mag-Flat Mounting Magnet.
    view full answer...

  • Installing T-Connector Part # C56093 on a 2011 Ford Explorer
  • The wiring will be ran from the drivers side to the passenger side under the threshold trim at the rear of the cargo area. Remove any screws or cargo tie-downs holding this piece in place. The threshold is held in place by a series of plastic clips and can be loosened from the front bottom edge and removed by GENTLY prying with a large screwdriver. Take your time here, you do not want to break any of the clips. The wiring can be zip tied to the existing wiring harness under the threshold...
    view full answer...

  • Trailer Wiring Harness to Fit 2017 Lexus RX 450h
  • The Curt # 56083 is confirmed to fit the 2016 Lexus RX 450h but unfortunately not the 2017. For your 2017 you'll need Curt # C59236. This harness has a powered converter that connects to the battery to protect your vehicle's wiring. It installs using quick-splice connectors. I've attached an install video on a BMW that you can look at. The install process will be fairly similar even though it's a different vehicle. Once you have the 4-way installed you can mount it to any metal...
    view full answer...

  • Availability of Extension Cable for Master Lock Hitch Alignment Back Up Camera # 4843DAT
  • Master Lock does not offer an extension cable, but because the 4-pole merely provides a ground and power connection, you could use 3 Wesbar 4-Pole Loops, part # 18044. When all 3 cables are joined together, you would have a cable that is approximately 12 feet in length. Since the camera transmits wirelessly, the quality of the picture would not be affected. A neater solution would be to mount the camera on your tool box as desired, and use a 4-way wiring harness like part # A20WB. You...
    view full answer...

  • Mounting 4-Pole Connector from T-1 Connector Part # 118269 on 2011 Hyundai Veracruz
  • The 4-pole connector at the end of your trailer wiring harness can certainly be zip tied, but using an installation bracket like part # 18144 along with a no drill mount like part # 18140 is recommended for a clean looking installation. A Mag-Flat, part # 38095 can be used instead of the bracket system. A storage box, part # 18145 is also offered. On my wifes KIA Sedona, I used the no drill mount, part # 18140, the bracket, part # 118137 and the knock out adapter, part # 30601. Your...
    view full answer...

  • Trailer Wiring and 4-Way Mounting Brackets for a 2011 Subaru Forester
  • You can certainly route trailer wiring however you would like provided that you can find a grommet or other exit source in the bottom of the cargo area through which to route the 4-Way. You will also need to seal it up with silicone once you have the wire routed to keep out exhaust fumes and moisture. I recommend the T-One Wiring Harness, # 118467. I have included a link to the installation details for you. If you look at the product page, you will see a diagram and picture under the...
    view full answer...

  • Recommended Trailer Wiring Harness and Class III Trailer Hitch Receiver on 2011 Cadillac SRX
  • If your 2011 Cadillac SRX already has the connector to plug a trailer wiring harness under the rear bumper then all you need for a wiring harness is the Tekonsha Custom Harness # 118259. This plugs directly into the connection and provides you with a 4-way trailer connector that will hang under the Cadillac's rear bumper. We recommend mounting the 4-way, with a mounting bracket, like # 18144 or for a less permenant option, the Mag-Flat # 38095. If your Cadillac did not have the connector...
    view full answer...

  • Can T-One Vehicle Wiring Harness # 118427 Be Routed Outside and Under a 2008 Honda CR-V
  • On a 2008 Honda CR-V, you could mount the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118427, on the outside of the vehicle instead of on the inside like shown in the video linked below. What you will need to do is find a grommet or exit port at the bottom of the cargo bay (you will probably have to remove the spare tire). You will need to cut a small slit in the grommet to fit the wires through. After cutting the grommet, be sure to seal it up with some silicone sealant...
    view full answer...

  • Running Trailer Wiring Connector for the 2010 Honda Element to the Outside of the Vehicle
  • Yes, you can run the vehicle side trailer connector to the outside of the vehicle if there is a grommet available in the back of the spare tire well. Just make a small slit in the grommet and run the smallest end of the harness through the hole. If you decide to do so you may want to install a mounting bracket to keep the 4-Way connector from dangling behind the vehicle. I would recommend the Mounting Bracket 4-Pole Flat, item # 18144, along with the No-Drill Mount Bracket, Short, item...
    view full answer...

  • Compatibility of Mag-Flat 4-Pole Magnet # 38095 with Hopkins Endurance Quick Fix 4-Pole # HM48190
  • After testing them together, I found that although the Hopkins Mag-Flat # 38095 is a great item, it is not compatible with the Hopkins Endurance Quick Fix 4-pole Connector, part # HM48190. The connector is physically too large to allow the clasp of the Mag-Flat to close and secure the connector. If you want to use the Mag-Flat mounting magnet, I would recommend using a standard 4-pole vehicle end like part # 18172, which would be compatible with the Mag-Flat. If you like the LED tester...
    view full answer...

  • Trailer Wiring Harness for 2013 Hyundai Santa Fe
  • The fact that you have located the connectors under the vehicle on the drivers side frame rail indicates that your Santa Fe is equipped with the factory tow package. The Tow Ready # 118269 would indeed be the correct wiring harness. I have confirmed this with Tow Ready. Using a mounting bracket like part # 18144 or # 38095 which is a no-drill option is recommended. The installation is very simple and straightforward, as shown in the installation instructions I have linked you to. ...
    view full answer...

  • Mag Flat Mounting Magnet, Part # 38095 for 4-Way Wiring Harnesses
  • The Mag-Flat mounting magnet, part # 38095 does not require any other pieces to work. It is a strong magnet and can be attached directly to your hitch, no bracket is necessary.
    view full answer...

  • Is a Wiring Harness Mounting Bracket Included with Trailer Wiring for a 2009 Toyota Tacoma
  • To secure the wiring at the rear of your vehicle you can use the Mounting Bracket 4-Pole Flat, item # 18144, along with a No-Drill Mount Bracket, item # 18140 short, or # 18136 long. This keeps the connector secure at the rear of the vehicle and is a no drill application with the bracket. You could also use the Mag-Flat (TM) 4-Pole Mounting Magnet, item # 38095. to secure the connector at the rear of the vehicle. The Tow Ready Custom Fit Vehicle Wiring, item # 118496, does not come...
    view full answer...

  • Trailer Wiring Harness and Mounting Bracket for a 2005 Chevy Colorado Z71 with Step Bumper
  • The wiring harness for your 2005 Chevy Colorado is Tow Ready Custom Fit Vehicle Wiring, # 118301. This is a T-one harness that plugs in line with your vehicle taillights and provides a 4-Way trailer connector at the rear of the vehicle. I have included a link to an installation video and the installation details below. I recommend adding a mounting bracket for the 4-Flat plug. Take a look at the Mag-Flat (TM) 4-Pole Mounting Magnet, # 38095. This mounting magnet will stick to any metal...
    view full answer...

  • Differences Between Tow Ready and Curt Trailer Wiring Harnesses for 1993 Jeep Wrangler
  • The Curt # C55356 and the Tow Ready # 118356 are equivalent in the level of quality. You can go with the less expensive of the two and not feel like you've sacrificed anything quality-wise. I've linked you to the installation instructions and a video showing the Tow Ready harness being installed. Either harness would work well with the mounts you've mentioned. Of the two, I personally prefer the Mag-Flat # 38095. The magnet is strong enough that the connector won't come loose, and you...
    view full answer...

  • Trailer Hitch Receiver to Fit 2004 GMC Sonoma Crew Cab SLS
  • The Draw-Tite Max Frame # 75085 is confirmed to fit your 2004 GMC Sonoma Crew Cab as long as you have either the factory step bumper or non-towing bumper. If your truck has the factory roll pan bumper then the Curt # 13920 is the correct hitch. If you're going to be towing with your truck you may also need wiring for your trailer's lights. The Curt Wiring Harness # C55359 will provide a 4-way trailer connector. This installs by plugging into your truck's wiring behind the rear bumper,...
    view full answer...

  • Is There A Wiring Mounting Tab On the Hidden Hitch Like The OEM Hitch for My 2004 Lexus RX330
  • There is no tab on the Draw-Tite, item # 75153, for mounting the wiring harness. We do carry mounting options for the wiring on your vehicle. For the 4-way trailer connector you can use either the Mag-Flat (TM) 4-Pole Mounting Magnet, item # 38095, or the 4 and 5-Flat Trailer Connector Mounting Box, item # 18145, which are some of our best selling mounting options for the 4-way flat connector. If you have a 7-way connector then you can use the 6 and 7-Way Trailer Connector Mounting Box...
    view full answer...

  • Wiring Harness and Mount for a 2007 Jeep Grand Cherokee
  • This item works for the Jeep Grand Cherokee (except SRT8) without any dealer involvement. The T-One harness just plugs in line with your existing taillights and then routes down under the bumper to a good location near the hitch. See the installation video link below. The only thing you may need is a mounting bracket to keep the trailer connector up out of the way. I have provided links to a magnetic 4 pole mount and to two brackets; one can be used as a screw on mount and the second can...
    view full answer...

  • Can # 118411 Trailer Wiring Harness Be Installed on 2007 Volvo XC90 With Connector Outside Vehicle
  • There's a very good reason that Tow Ready and Curt design the trailer wiring harnesses so that the 4-pole trailer connector is stored in the cargo area. Most folks who drive passenger vehicles don't tow constantly, so it's better to keep the trailer connector safely stowed in the vehicle where it can't be damaged or exposed to corrosion causing moisture. When the connector is needed, it's pulled out, and the rear hatch is closed on it. The rubber weatherstripping is truly thick enough so...
    view full answer...

  • Recommended Brackets To Hold Wire Harness Connector On 2002 Buick Park Avenue
  • We sure do have what you need. If you have a 4-way harness on your 2002 Buick Park Avenue, I recommend a no-drill system using part # TM76470, and part # TM75475. This can be attached directly to the trailer hitch and keeps the 4-way from hanging loose and possibly being damaged. If you prefer a very simple solution, you may want to check out the Hopkins 4-Pole trailer Wiring Mounting Magnet, part # 38095. This attaches to the 4-way flat connector and has a strong magnet that will keep...
    view full answer...

  • 4-Way Trailer Connector Mounting Bracket for Tow Ready Wiring Harness on a 2014 Honda Pilot
  • It sounds like you have Tow Ready harness # 118558 on your 2014 Honda Pilot. For a 4-Way mounting bracket there are some options. You can using bracket # 18144 with either long bracket # 18136 or short bracket # 18140. You could also use something as simple as # 118149 or magnetic mount # 38095.
    view full answer...

  • 4-Way Mounting Bracket Recommendation for the Hopkins Endurance 4-Way # HM48190
  • The # HM48190 is a pretty large connector that most traditional brackets won't quite fit into, but you could use the magnetic bracket part # 38095. You would just use the bracket to grab just the wires before the 4-way and it would be secured.
    view full answer...


Do you have a question about this Accessories and Part?






Why etrailer.com?

At etrailer.com we guarantee:


Highest quality accessories and parts for the best price.


Real product know-how.

  • We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. This helps you get the right product the first time.
  • Every day our teams test, review, assemble and install our products. Our modern installation facilities allow our expert installers and customer service representatives to actually install and use the items we sell, so you can get real advice, from a real person who has the knowledge and expertise needed to solve your problem.

Most detailed, accurate accessories and part information available.

  • Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.

Information for this part was:

Expert Research:
Michael L
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Sarah W

Installations, made easy.

  • We love helping people.
  • We have the most highly trained customer service, hands-on experience, step by step videos and installation instructions. We are prepared to answer any question, give advice, or troubleshoot any problem you come across.

Fast shipping.


Personalized service for life.

  • We provide one-on-one, personalized service from the ordering process through the life of your product.

Trusted since 1946.

  • We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.

Info for this part was:


Expert Research:
Michael L

Expert Research:
Jameson C

Updated by:
Laura H

Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.