Replacement Spring and Cable Kit for Gorilla Lift Utility Trailer Tailgate Lift Assist - Qty 1

Gorilla-Lift Accessories and Parts - GSCC-400

Replaces spring and cable (enough for 1 side) for Gorilla Lift utility trailer tailgate lift assist (GL1).

Features:

• Replaces spring and cable for 1 side of your Gorilla Lift utility trailer tailgate lift assist (GL1)
• Cable diameter: 0.15"
• Quantity: 1

GSCC-400 Replacement Spring and Cable Kit for Gorilla-Lift Utility Trailer Tail Gate Lift Assist - Qty 1

Related Products

Replacement Roller Assembly Kit for Gorilla Lift Utility Trailer Tailgate Lift Assist - GMNR925

$22.95

Replacement Cable with Quick Link for Gorilla Lift Utility Trailer Tailgate Lift - GLC1-Q1

$29.95

Replacement Gate Attachment Bolt for Gorilla Lift Utility Trailer Tailgate Lift Assist - Qty 1 - GLGAB

$5.49

Customers compare GSCC-400 to these similar products

Replacement Roller Assembly Kit for Gorilla Lift Utility Trailer Tailgate Lift Assist $22.95

Replacement Cable with Quick Link for Gorilla Lift Utility Trailer Tailgate Lift $29.95

Replacement Cables for Enclosed Trailer Ramp Spring $26.95

Replacement Lower Spring for Rack'Em Double Barrel Trailer Tailgate Lift Assist - Qty. 1 $19.95

Replacement Upper Spring for Rack'em Double Barrel Trailer Tailgate Assist $15.95

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires $65.84

Replacement Gate Attachment Bolt for Gorilla Lift Utility Trailer Tailgate Lift Assist - Qty 1 $5.49

Customers Who Purchased This Accessories and Parts Also Bought...

Replacement Roller Assembly Kit for Gorilla Lift Utility Trailer Tailgate Lift Assist$22.95

Replacement Cable with Quick Link for Gorilla Lift Utility Trailer Tailgate Lift$29.95

Trailer Hub Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2$46.95

Spindle 2.25" RD x 6" STUB$37.95

Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 2" x 10' - 1,100 lbs - Qty 2$34.95

Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 1" x 10' - 400 lbs - Qty 2$19.99

Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal$12.00

Replacement Cables for Enclosed Trailer Ramp Spring$26.95

Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red$4.69

Replacement Gate Attachment Bolt for Gorilla Lift Utility Trailer Tailgate Lift Assist - Qty 1$5.49

Ask the Experts about this Gorilla-Lift Accessories and Parts
Do you have a question about this Accessories and Part?

• Is the Gorilla Lift Cable Available Separately for the Gorilla Lift # GL1
  
• Because the attachment of the cable on the Gorilla Lift, # GL1, to the Spring could be a safety issue, the cable is not available separately. You would need to purchase the Spring and Cable Kit, # GSCC-400, to replace the cable.
  view full answer...


• Diameter of the Cable On the Gorilla Lift Tailgate Assist # GL1
  
• I went and pulled a Gorilla Lift Utility Trailer Tailgate Lift Assist # GL1 from our warehouse to measure the diameter of the cable and found that it has a .15 of an inch diameter and is not coated. We haven't had any issues from our customers with the cable failing, but we do offer a replacement cable # GSCC-400 if that were to occur.
  view full answer...


• Replacement Spring and Cable Kit Recommendation for a Gorilla Lift Tailgate Assist
  
• We do not offer the cable separate from the spring for your Gorilla Lift Tailgate Lift Assist part # GL1 so you would need to order the Replacement Spring and Cable Kit # GSCC-400.
  view full answer...


• Replacement Cable and Spring Recommendation for a Gorilla Lift Tailgate Assist part # GL1
  
• Unless it was overloaded or otherwise misused the cable of the Gorilla Lift Tailgate Assist part # GL1 should not have snapped. This product is covered by a 1 year warranty, if you bought it less than a year ago you should contact the retailer you bought the product from. As long as the product wasn't misused the other cable shouldn't break anytime soon. For a replacement cable and spring you would want the Replacement Spring part # GSCC-400. If the rollers look fine and seem to be...
  view full answer...


• Recommended Ramp Spring for Toy Hauler Ramp
  
• We have ramp springs that would work well for you, but the springs part # GSCC-400 are not intended for what you are looking to do. Typically for toy haulers ramp springs like the part # ERS80S66 are what we recommend. This installs above the rear door frame and allows it to easily be lifted. The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend...
  view full answer...


• Can Single Tailgate Lift Assist be Purchased Instead of Gorilla Lift GL1 that Comes as a Set
  
• If you happen to already have the Gorilla Lift Utility Trailer Tailgate Lift Assist, GL1, and one side is in need of repair, we have replacement parts available. We offer the Replacement Roller Assemblies, # GMNR925, and the Replacement Spring and Cable Kit, # GSCC-400. The Gorilla Lift Utility Trailer Tailgate Lift Assist, GL1, is a two-sided tailgate assist system. By attaching to both sides, it helps to prevent trailer gates from warping or the hinges from deteriorating prematurely...
  view full answer...


• Is it Normal to have to Replace Cables on Gorilla Lift Once a Year
  
• I would say that it is not normal to have to replace the Gorilla Lift cables with # GLC1-Q1 very often under normal circumstances and certainly not once a year. If the system is overloaded, mounted outside of its specified range, or the trailer is often in extreme weather conditions (a lot of salt) then that would reduce the lifespan. The Gorilla Lift # GL1 is rated for up to 300 pounds for tailgates that are 4 to 6 feet tall. The trailer side rail height also needs to be 12 to 24 inches...
  view full answer...


• Weight Rating of Replacement Spring and Cable Kit for Gorilla Lift GSCC-400
  
• The Replacement Spring and Cable Kit for Gorilla Lift, part # GSCC-400, has a weight capacity of 150-lbs. This is used in a set of 2 springs on their # GL1 lift, the total weight rating for which is 300-lbs.
  view full answer...


• Replacement Spring and Cable Recommendation for a Gorilla Lift GL1
  
• The correct replacement spring and cable you would want for your Gorilla Lift part # GL1 is the part # GSCC-400. There will be a bolt and nut at the end of the # GL1 that holds the spring. When there's not tension on the system you will need to remove that bolt and nut so that you can get the old spring out. You will also need to remove the rollers at the other end of the unit so that you can pull the spring and cable all the way out.
  view full answer...

Do you have a question about this Accessories and Part?

Why etrailer.com?

At etrailer.com we guarantee:

Highest quality accessories and parts for the best price.

• Our Lowest Price Pledge ensures you will never overpay for the parts you need.

Real product know-how.

• We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. This helps you get the right product the first time.
• Every day our teams test, review, assemble and install our products. Our modern installation facilities allow our expert installers and customer service representatives to actually install and use the items we sell, so you can get real advice, from a real person who has the knowledge and expertise needed to solve your problem.

Most detailed, accurate accessories and part information available.

• Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.

Information for this part was:

Photos by:
Theodore B

Expert Research:
Robert G

Expert Research:
Michael H

Expert Research:
Jameson C

Expert Research:
Adam R

Updated by:
Laura H

Updated by:
Sarah W

Installations, made easy.

• We love helping people.
• We have the most highly trained customer service, hands-on experience, step by step videos and installation instructions. We are prepared to answer any question, give advice, or troubleshoot any problem you come across.

Fast shipping.

• Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.

Personalized service for life.

• We provide one-on-one, personalized service from the ordering process through the life of your product.

Trusted since 1946.

• We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.