Repair Kit for Fulton Winch

Fulton Accessories and Parts - 1562S00-SP

• Winch repair kit
• Fits the following Fulton winches:
  • T2005,T2025,T2605,T2625,T3205

Customers compare 1562S00-SP to these similar products

Ratchet Repair Kit for Fulton Hand Winches$9.99

Replacement Spring for Fulton Winch$0.74

Ratchet Repair Kit for Fulton Winches$5.99

Winch Ratchet Repair Kit - for T1100, T1300 & T150 Series Winches$7.99

Pinion Shaft Repair Kit for Fulton Brake Winch$38.95

Customers who look at this part also view

Fulton High-Performance 2-Speed Trailer Winch w/ Strap - 2,600 lbs$124.95

Fulton High-Performance 2-Speed Trailer Winch - Cable Only - 3,200 lbs$130.95

Fulton High-Performance 2-Speed Trailer Winch w/ Handbrake - Cable Only - 3,700 lbs$209.95

Customers Who Purchased This Accessories and Parts Also Bought...

Lockwasher for Brake Mounting Bolt for 7" and 10" Brake Assemblies $0.15

Nut for Brake Mounting Bolt for 7" and 10" Brake Assemblies $0.25

Fulton Nylon Winch Strap with Hook - 20' x 2" - 7,800 lbs $10.99

Replacement Spring for Fulton Winch $0.74

Hand Winch Cable with Safety Hook 1/4" Diameter x 25'Long - 2,500 lbs. $31.95

Ask the Experts about this Fulton Accessories and Parts
Do you have a question about this Accessories and Parts?

• What does a 935 Fulton Single Handled Work Winch Repair Kit Contain?
  
• I am sorry, but Fulton Ratchet Repair Kit number 1562S00-SP will not work with your 935 Fulton winch. The correct kit is part number 6731S00 and contains a lock nut, spacer, spring, and ratchet pull. This kit is not interchangeable with the K Series brake winch.
  view full answer...


• Availability of a Replacement Spring for the Fulton T1801 Hand Winch
  
• The correct repair kit for the Fulton Fulton Single Speed Winch - 10 inch Long Handle - 1,800 lbs, item # FT18010301, is the Ratchet Repair Kit for Fulton Hand Winches, item # 1598S01. This kit includes the spring that you need.
  view full answer...


• Which Ratchet Repair Kit Work For My Fulton Winch part # FT2605Z0301
  
• I contacted our representative at Fulton, and he informed me that the Ratchet Repair Kit for Fulton Winch, part # 1562S00-SP, will work for any of the FT2605 series Fulton winches. He informed me that if you have an older model Fulton winch that would have a part # with 2500 or 2000 then it would not fit those. So, if you have a FT2605 series winch, like part # FT2605Z0301, the Ratchet Repair Kit for Fulton Winch, part # 1562S00-SP, will work.
  view full answer...


• How to Install the Spring in the Ratchet Repair Kit for Fulton Winch, # 1562S00-SP
  
• I went out to the warehouse and pulled one of the winches the Ratchet Repair Kit for Fulton Winch, # 1562S00-SP, and took it apart. I got to use tools so I was happy to do so. The spring is the trickiest part of this particular assembly because if it is not in the right place, the winch will not ratchet correctly (as I found out). The whole assembly will need to be loose to position the spring. But as far as placement, on the inside of the winch, one end of the spring goes through the small bott
  view full answer...


• Availability of a Ratchet Repair Kit for the Fulton T900 Single Speed Winch
  
• The Fulton ratchet repair kit # 1598S01 would be the correct repair kit for the T900 series single speed winch. It includes the spacer, ratchet pawl, bushing, ratchet springs, lock nut, and the cap screw. The Fulton Ratchet Repair Kit, part # 1562S00-SP that you have referenced is for the two speed winches and will not work on the T900 winch.
  view full answer...


• How to Replace the Lever Spring on a Fulton T2005 Series Trailer Winch
  
• The spring is the trickiest part of this particular assembly because if it is not in the right place, the winch will not ratchet correctly. The whole assembly will need to be loose to position the spring. But as far as placement, on the inside of the winch, the end of the spring that sticks out furthest from the coil goes through the small bottom hole on the lever of the winch. The other end goes through the small bottom hole on the winch body. You know you have it in correctly if the end th
  view full answer...


• Replacing the Spring on a Fulton T1801 Trailer Winch with Repair Kit # 1598S01
  
• The correct ratchet repair kit for a Fulton T1801 winch is # 1598S01 that you mentioned in your question. I made a short video that will show you exactly how to replace the spring on the winch.
  view full answer...