Draw-Tite Accessories and Parts - 6495
Draw-Tite Trailer Hitch Electric Winch Mount
- 2" Solid shank
- Receiver mount is all welded
- 1/4" Thick plate
- 2 Sets of four (eight) mounting holes
- Centered on the cable opening
- 10" by 4-1/2" on center and 6-1/2" by 4-1/2" on center
- Has durable, black powder coat finish that resists corrosion
- Roller fairlead mounting points
- Optional handle/guard kit (6980) makes installation easy while protecting valuable winch
- Universal design support most major winch models including:
Specs:
- Width of oval bolt holes on front lip of plate: 1"
- Overall plate dimensions: 12-15/16" L x 7-3/4" W
- Shank measurement, from rear edge of plate to end: 7-3/8"
-
- Ramsey
- ProPlus 5000, 6000, 8000, 9000
- Pro 5000, 6000, 8000, 9000
- Rep 5000, 6000, 8000, 9000
- RW4000
- Warn
- XD9000i, XD8000i, M8000, M5000
- SuperWinch
- S9000, S6000, X9, X6CD, EP9.0, EP6.0, EPi9.0 and EPi6.0
- And Numerous Others
Winch plate shown with winch and optional handle kit (# 6980).
Customers compare 6495 to these similar products
Customers who look at this part also view
Customers Who Purchased This Accessories and Parts Also Bought...
Ask the Experts about this Draw-Tite Accessories and Parts
- Winch Mount Plate Comparison for Front Mount Receiver Mounting Plate
- The plate on the part # C31010 winch mount plate is 1/4 inch thick. This mount has 2 sets of four (eight) mounting holes centered on the cable opening which are 10 by 4-1/2 inches on center and 6-1/2 by 4-1/2 inches on center. This mount is all welded and ready to use right out of the box.
The plate on the part # 6495 is 1/4 inch thick and has the same mounting hole pattern as the C31010. This receiver mount is all welded and has a solid steel drawbar as opposed to the others that have a 1
view full answer...
- Utility Trailer Winch Mounting Options
- You would not be able to mount a winch to a wood bed if you are going to put any kind of load on it. You would need to get the winch mounted to the steel frame somehow. To do this you can use U bolts to attach through the wood bed to the trailer frame, if there is steel frame below the bed. Otherwise you will want to fabricate a mounting location for your trailer.
Since you were looking at the Front Mount Trailer Hitch Winch Plate, part # 6495, you could purchase a Hitch Receiver tube and hav
view full answer...
- Will the Front Mount Trailer Hitch Receiver Winch Mounting Plate # 6495 Fit a 1998 Jeep Wrangler
- Yes, the Front Mount Trailer Hitch Receiver Winch Mounting Plate, item # 6495, will fit in a Curt 2 inch receiver like the Curt Trailer Hitch for the 1998 Wrangler by Jeep, item # 13408.
Other parts you may be interested in are the Curt Trailer Hitch Electric Winch Mount Plate, item # C31010, or the Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly, item # C31009.
view full answer...
- What is Weight Capacity of Draw-Tite Front Mount Hitch Receiver Winch Mounting Plate # 6495
- I checked with my contact at Draw-Tite and they said that the Draw-Tite Front Mount Hitch Receiver Winch Mounting Plate, part # 6495, is designed for use with winches up to a 9,000-lb line pull rating. The reason for the 9,000-lb maximum is because he said most all of the front mount receiver hitches are only designed for winches with a maximum line pull rating of 9,000 lbs, so the front hitch on the vehicle will be the limiting weight capacity.
I have the Superwinch Mounting Plate, part # SW
view full answer...
