customer service | view cart  View Cart


What our customers are saying:

WOW that is quick. Both inexpensive and quick that is a rarity.You can bet I will tell everyone I talk to about this sort of thing about this web site THANKS again

David

Baton Rouge, LA

2007 Ford Accessories:

change make

Select 2007 Ford Model



Select Model for Your 2007 Ford



2007 Ford Accessories



2007 Ford Questions and Answers


  • Which Tailgate Pad Bike Rack Fits a 2007 Ford Explorer Sport Trac
  • The Softride Tailgate Pad, # SR26461, for mid size trucks is probably going to be the best option. It measures 54 inches long so compare that to the tailgate on your 2007 Ford Explorer Sport Trac to determine fit. The model for a full size truck, # SR26457, is 61 inches long. Thule also has a similar product, # TH823 for a 54 inch or # TH824 for a 62 inch. And Yakima is a player in this game as well. They have the 54 inch model # Y02455 and a 62 inch model # Y02456. All of these items
    view full answer...

  • Installing a Trailer Hitch and a Brake Controller with Wiring Harness on a 2007 Ford F-150
  • We have everything you need to install a trailer hitch, brake controller and wiring harness on your 2007 Ford F-150 5.4L Triton. We can start with a trailer hitch. There are many trailer hitch options that are available for your truck, but should keep in mind that aftermarket trailer hitches will only fit on your truck if you do not have a factory hitch installed. You could go with a Class III or a Class IV hitch. A Class III Hitch like the Draw-Tite Max Frame Trailer Hitch, # 75431, has a 6
    view full answer...

  • Can a Trailer Hitch be Installed on a 2007 Ford Mustang GT
  • First, if you go through our fit guide for a specific year, make, and model vehicle, if you do not also select a specific trim level (if available) from the drop down menu it will show you all the hitches for all the trim levels. Some fit multiple trim levels so that is why you see it fitting GT and not GT. You can install a trailer hitch on your 2007 Ford Mustang GT as long as it is not a specialty GT model (GT/CS California Special, Shelby GT, and GT500). Rental places are not necessarily t
    view full answer...

  • Will a Pro Series Eclipse 4 Bike Rack # 63124 Fit on 2007 Ford Edge and Hold Mens and Womens Bikes
  • The Pro Series Eclipse 4 Bike Rack, # 63124, will work with your 2007 Ford Edge as long as you have a trailer hitch with a 2 inch receiver opening installed on your vehicle. We have installed this bike rack on a 2011 and a 2012 Ford Edge which are the same generation as your 2007 model. I have attached a demonstration video on the 2011 Ford Edge for you to check out. The single arm of this bike rack was designed to work with many different styles and sizes of bikes, however if your womens bik
    view full answer...

  • Installing CTEK Battery Health Indicator # CTEK56380 in Outside Wall of Horse Trailer
  • The CTEK Battery-Health Indicator you referenced features a rubber plug to exclude moisture and dirt from the connector where the charger would plug in, but I wanted to call CTEK to ensure that the item would hold up when installed in an area where it would be exposed to the weather. According to the fine folks at CTEK, installing the Indicator to the outside of the trailer would be perfectly acceptable and should work just fine for you.
    view full answer...

  • Stability of K-Source Custom Towing Mirrors for 2007 Ford F-150, Part # KS81800, While Driving
  • The K-Source Custom Snap-On Towing Mirrors for Ford F-150, part # KS81800, are a custom-fit product made specifically for your 2007 Ford F-150. Because these snap on to your factory mirrors on three sides of their housing, they are very secure once installed. You can still use all the functions of your OEM mirrors. Since the K-Source towing mirrors act as extensions to your factory mirrors they do not interfere with any of their original powered functions. This part consists of a set of t
    view full answer...

  • Will the Firestone Coil-Rite Air Spring Fit a 2007 Ford Fusion AWD Without Rear Strut
  • We have found that some of the 2007 Ford Fusion AWD models have struts not only in the front, but in the rear as well. The Firestone Coil-Rite Air Helper Springs, # F4169, were designed to fit the models that only have the bump stops inside of the rear coil springs, not the struts. We had a 2007 Ford Fusion on our lot, so I took a picture of the rear suspension with the bump stop in the coil spring. If your rear suspension looks like the photo that I have attached, then you can use the Coil-
    view full answer...

  • How to Change 5th Wheel Trailer Air-over-Hydraulic Brakes to Electric-over-Hydraulic Brakes
  • Converting your 5th wheel trailer brakes from air-over-hydraulic to electric-over-hydraulic will give you the faster response time of electric brakes while keeping the superior stopping power of hydraulic drums. I have attached an article that reviews the air-to-electric conversion process and what components are needed. Since you already have a factory brake controller and 7-way vehicle connector, and since your trailer already has drum brakes in place, you are most of the way there. Al
    view full answer...

  • Parts Needed to Flat Tow a 2007 Ford F-150 Behind a Motor Home
  • First, you have to make sure that your 2007 Ford F-150 does not exceed 5,000 pounds. If so then you can use base plates # BX2169 and they are compatible with the Allure tow bar # BX7460P. If your truck does weigh over 5,000 pounds then I recommend Roadmaster base plates # 495-1A and using Blackhawk tow bar, # RM-422, with safety cables # BX88197. This is because the capacity of the Blue Ox base plates is 5,000 pounds. Depending on what is in the truck and how it is equipped you could easily go o
    view full answer...

  • Parts Needed to Flat Tow a 2007 Ford F-150 that Weighs Over 5,000 Pounds
  • Since your truck is pushing the limit of 5,000 pounds for some tow bars then I recommend Roadmaster base plates # 495-1A and using Blackhawk tow bar, # RM-422, with safety cables # BX88197. The tow bar and cables are rated for 10,000 pounds. Next you will need a lighting kit like # RM-154 for frequent flat towing or # C-ATL20A for a magnetic kit for infrequent towing. And finally most states require a supplemental braking system on the vehicle being flat towed. One of the easiest to set up
    view full answer...

  • Performance Tuner for 2007 Ford F150 with 5.4L Engine
  • For the 2007 F150 with the 5.4l engine, I would recommend a programmer very similar to the one you mentioned, part # EP85150. Edge confirms that this programmer is compatible with your truck and engine. If you would prefer a touch-screen model, we offer the Evolution CTS Gas, part # EP85250. According to Edge, you can realize up to a 35 HP and 45 foot/lbs of torque increases.
    view full answer...

  • Custom Slide-On Mirrors for 2007 Ford Expedition Max
  • For your 2007 Expedition, I would recommend a universal clip on mirror like the K-Source # KS3891 or the CIPA Door Mount Mirror, part # 11650. For occasional use, the clip on mirror would be a great choice, the ratcheting straps allow it to be tightly connected to the mirror. For more frequent use, the CIPA Door Mount Mirror is your best bet. The ratcheting strap mounting system provides a secure connection with minimal vibration. There is unfortunately not a custom slip-on mirror option f
    view full answer...

  • How to Install a Brake Controller on a 2007 Ford Explorer with a 4-Way Factory Connector
  • You can use that factory port for the brake controller, however, there is no 7-Way kit available for the 2007 Ford Explorer with factory 4-Way. You will have to find were the blue wire for brakes terminates. From our experience it terminates in a harness behind the driver side wheel well or behind the door. You will need to route a length of wire # 10-1-1 from this point back to the # 37185 blue wire. The black wire will need to be routed under the vehicle and to the positive battery terminal
    view full answer...

  • Using a Long Ball Mount to Launch a Pontoon Boat with a 2007 Ford Escape
  • For this type of situation I recommend using the longest ball mount that you can. The reason is that because a ball mount is one piece it will not reduce the tongue weight capacity of the trailer hitch. If using an extender it will reduce the tongue weight capacity by 50 percent. For a super extra long ball mount I have provided a link to the available options. A ball mount like # 80232 measures 16 inches from the center of the hitch pin hole to the center of the ball hole.
    view full answer...

  • Trailer Wiring Recommendations to Install Brake Controller on 2007 Ford E250 without Factory Wiring
  • The Curt Custom Fit Vehicle Wiring # C56020 that you referenced does not include the wiring to activate trailer brakes. In order to activate the trailer brakes you will need to install the # C56020 and a Brake Controller Installation Kit # ETBC7. This kit comes with everything you would need to install a brake controller which will activate the trailer brakes. I attached some helpful links for you to check out also.
    view full answer...

  • How to Mount Existing 7-Way Connector on New Curt Hitch Receiver
  • The Curt Class V 2 Inch Hitch Receiver you are considering for your F-350, part # C15410, could be drilled to allow you to mount your 7-way/4-way connector bracket. However, drilling into the main tube could introduce the possibility for corrosion by creating gaps where moisture could enter. I spoke to my contact at Curt and they confirmed that instead you could, if absolutely necessary, mount your connector bracket to either of the 3 supports around the receiver opening; there is a large suppor
    view full answer...

  • Can a Regular Reese Slider Hitch be Used in the Underbed Pucks on a 2007 Ford F-350
  • Since your 2007 Ford F-350 has the underbed mounting system, you will need an adapter, # RP30156, in order to use hitch # RP30051. I have included a link to the installation instructions. The puck system was deigned for the Reese Signature Series (no longer available) and current Elite Series hitch like # RP30142 that you have referenced.
    view full answer...

  • Fifth Wheel Installation Kit for a 2007 Ford F-350 with a Valley 15K Sliding Hitch
  • The measurement from the rear edge of the truck bed to the rear edge of the closest rail for the Valley universal installation kit is 28-1/4 inches for your 2007 Ford F-350. We have a few different installation kit options for your truck, however, at this time we do not carry the Valley universal kit. The Valley Install Kit, # V55091R, that you referenced is a custom install kit for 2007 to 2012 GM trucks and will not work on your F-350. If you already own a Valley universal installation kit, th
    view full answer...

  • How to Determine When Weight Distribution is Needed
  • The Draw-Tite trailer hitch # 41933 is compatible with weight distribution but to determine if you need to use a weight distribution system you will want to go by the weight of the trailer. We recommend using a weight distribution system when the trailer weighs 50 percent or more of the vehicle weight or if the rear of the vehicle is sagging. I have included a link to our FAQ article on weight distribution for you to view. If you determine that weight distribution is needed you will need to g
    view full answer...

  • Composition of Master Lock Key Safe and Trailer Hitch Receiver Lock # 1467DAT
  • After speaking with my contact at Master Lock, I have discovered the body of the Master Lock Key Safe and Trailer Hitch Receiver Lock # 1467DAT is made of stainless steel with a water-resistant lid that flips down to protect and conceal the combination lock. The lock itself is made of a combination of steel and chrome. I have linked to the instructions on how to properly use this product and how to set the combination as well as a video showing the item more in depth. The cylinder that attach
    view full answer...

  • 4-Pole Trailer Wiring Harness for 2007 Ford Ranger
  • The 4-pole Hardwire Trailer Wiring Harness, part # 18252 is the correct wiring harness for your 2007 Ford Ranger. Although there is not a plug and play option available, the # 18252 is simple and straightforward to install. Simply locate the wiring harness behind the rear bumper that feeds the taillight assemblies. Have a helper activate the left turn signal, and use the included tester to pierce the insulation of each wire until you locate one that makes the tester blink. Then, tap the yell
    view full answer...

  • Adding a 6-Way Trailer Connector and Brake Controller to a 2007 Ford Explorer with Factory 4-Way
  • In order to install a brake controller and a 6-Way connector on a 2007 Ford Explorer that has a factory 4-Way you will need 2 items. First you will need the brake controller itself. I recommend the Tekonsha P2, # 90885, because it is one of our best selling controllers because it is easy to use and set up. Then you will need installation kit # ETBC6. This kit is needed because all of the wiring is not ran to the back of an Explorer that has the 4-Way. I have included some links that will help
    view full answer...

  • Will Firestone Ride-Rite Air Helper Springs # F2264 Fit a 2007 Ford F-250 with 4 inch Lift
  • I checked with Firestone and you can use the Ride-Rite kit # F2264 for your 2007 Ford F-250 with a 4 inch lift. The kit only fits if your truck is rated for 8,500 pounds gross vehicle weight or more.
    view full answer...

  • Tan Floor Mats for a 2007 Ford Fusion with Tan Interior
  • As you probably know, not all tans are the same. The tan floor mats # 44022 will be a close approximation of what you have and it will be the closest match out of anything we have. Take a look at the video I have linked to get a better idea of what the mats look like. The Husky Liners tan floor mats, # HL51173, are a little lighter than the mats you have referenced. Between these two sets, one will be a better match than the other.
    view full answer...

  • Parts Needed To Flat Tow 2007 Ford F-150 2WD Super Cab Behind 1994 Cruisemaster Motor Home
  • You will need to check with your vehicle manufacturer or owners manual for instructions on the proper procedure for towing your vehicle, because some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect, or free-wheeling hubs before they can be towed. Your 2007 Ford F-150 2WD Super Cab 4-Door can be flat towed as is if it has a manual transmission. The 2WD models can not be flat towed if it has an automatic transmission. If you have the manual
    view full answer...

  • Edge Programmer Recommendation for a 2007 Ford F250 with a 6.0 Liter for Fuel Economy
  • The Edge Insight CTS # EP83830 that you referenced has an economy tune that is specifically tuned for optimum fuel economy and would be an excellent choice for your 2007 Ford F-250 with a 6.0 liter diesel engine. Check out the installation video I attached also.
    view full answer...

  • Brake Controller Installation on 2007 Ford Explorer Sport Trac
  • In my research, I can find no reference whatsoever to a Explorer Sport Trac being equipped with the factory tow package, so it must be a rare option. Which trailer connector does your Sport Trac have? You can confirm that the connector under the dash is active, and that the pig tail you have has power to the black wire, and the red wire shows voltage when the brake pedal is pressed by using a circuit tester like part # 40376 on each wire. If that checks out, you will need to examine the re
    view full answer...

  • 5th Wheel Trailer Hitch Installation Kit for an RBW Lil Rocker and 2007 Ford Supercrew 6.5 Foot Bed
  • I cannot recommend using the RBW rails with another brand installation kit because they have not been tested together. However, we do know that the RBW Lil Rocker will fit in the Reese 5th wheel rails. So what I recommend is going ahead and getting a kit that you know is compatible and avoid any compatibility issues. The semi-universal kit for the 2007 Ford F-150 with 6.5 foot bed is # RP30035-426. If you want to go with a custom kit for an easier and quicker install, go with # RP50081-58. I
    view full answer...

  • Will the Thule T2 Trailer Hitch Mount Bike Rack, # TH917XTR Fit a 2007 Ford Focus Wagon
  • The Thule T2, # TH917XTR, is compatible with the Class I Draw-Tite trailer hitch # 24682 on your 2007 Ford Focus Wagon. The hitch has a tongue weight capacity of 200 pounds so you will want to make sure that you stay under that. The bike rack weighs about 50 or so pounds. This leaves you with up to, but not exceeding, 150 pounds of tongue weight. Since the bike rack is only rated for 100 pounds total, you should not have any problems with capacity. You will want to measure from the center of
    view full answer...

  • Dimensions of UWS L Bracket Part # UWS-SMBK
  • The UWS L-Bracket you referenced, part # UWS-SMBK is constructed of 1/4 inch plate. You can see the rest of the dimensions by referring to the photo I edited for you.
    view full answer...





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com