customer service | view cart  View Cart


What our customers are saying:

Prompt. Very friendly and helpful over the phone. Price right.

Joe

Wichita, KS

2005 Mazda Accessories:

change make

Select 2005 Mazda Model



Select Model for Your 2005 Mazda



2005 Mazda Accessories



2005 Mazda Questions and Answers


  • Trailer Hitch Recommendations for a 2005 Mazda 6 Sedan, Hatchback, or Sport Wagon
  • The best way to avoid all of that is to get you the correct hitch the first time. For the 2005 Mazda 6 there is a sedan, a hatchback and a Sport Wagon. Trailer hitch # 60846 will fit the sedan and the hatchback. For the Sport Wagon you would use a hitch like # 60857. If you are not sure if you have a hatchback or a wagon the hatchback will be about the same length as the sedan, the wagon will be longer. Hatchbacks generally have a more stubby rear end and limited cargo space whereas the longe
    view full answer...

  • Installing Hidden Hitch Class III Receiver # 87626 on 2005 Mazda Tribute with Factory Receiver
  • According to Hidden Hitch, their Class III receiver, part # 87626 will indeed fit on a Mazda Tribute equipped with the OE hitch. You should not remove the factory hitch. In fact, they are typically welded in place and would be difficult to remove without damaging the structure of the vehicle. As you can see in the diagram I provided, the Hidden Hitch # 87626 would sit below the factory hitch. Hidden Hitch specifically states that you should NOT use both hitches at the same time.
    view full answer...

  • Availability Of Bike Rack To Fit a 2005 Mazda 6 Hatchback
  • I do have a way to carry bikes on your 2005 Mazda 6 Hatchback, but it is not with a trunk mounted bike rack. A trunk bike rack will not be able to be used on a 2005 Mazda 6 Hatchback model because the hatchback will not be able to carry the weight of a trunk bike rack. I would recommend to use a hitch like the Draw-Tite Class I 1-1/4 Inch Hitch, part # 24775, along with the Thule Vertex 2 Bike Carrier, part # TH9028. I am including links to the installation instructions of the hitch and a vi
    view full answer...

  • Hitch Recommendation for a 2005 Mazda 3
  • For your 2005 Mazda 3 you would want a Hidden Hitch # 60201. This hitch is specifically designed to work on your vehicle, whereas the Curt Hitch # E-3S is a universal hitch that is designed to work on the bumpers of trucks and because of that would not work for. Check out the installation video and installation instructions I attached for this product also. This hitch comes with a drawbar as well as a pin and clip, but you may also be interested in the following products to complete your
    view full answer...

  • Will the Draw-Tite Max-Frame Class III Trailer Hitch Fit on a 2005 Mazda Tribute S
  • I verified with my contact at Draw-Tite that the Draw-Tite Max-Frame Class III Trailer Hitch, # 75751, will fit all models of the 2005 Mazda Tribute. The only issue that you may run into will be with the wiring harness. There are two wiring harnesses available for your vehicle. If your vehicle came with a factory tow package, then you can use the Hopkins Custom Fit Wiring Harness, # 40455. If you do have the factory tow package, then you may need to may need to see a local Ford dealership
    view full answer...

  • Straight Replacement Coupler for the Takeda Short-Ram Cold Air Intake System
  • The replacement coupler for your Takeda Short-Ram Cold Air Intake System, # AFETR-4101P, is the Straight Replacement Coupler, # 05-00417. This coupler measures 2-3/4 inches in diameter by 1-3/4 inches tall.
    view full answer...

  • Recommended Trailer Hitch and Wiring for a 2005 Mazda 5 Wagon
  • The Draw-Tite hitch # 24785 would be a good choice for your 2005 Mazda 6 Wagon, but if you are planning on towing a trailer I would recommend the CURT hitch # 11308, which includes the draw bar and a pin and clip. If you prefer, you can also go with the Draw-Tite hitch and just get the recommended draw bar and pin kit, part # 3593, separately if you need it in the future. View the installation instructions for both hitches at the included links. To wire your vehicle, you would use circuit-pr
    view full answer...

  • Fit of Curt Class III Receiver Part # 13650 on 2005 Mazda Tribute with Full-Sized Spare Tire
  • Any of the class III receivers offered for your 2005 Tribute, including the Curt model you reference, are compatible with a full-sized spare tire. The curved shape of the hitch fits around and below the spare tire, and will not interfere. I have provided a link to an install video for you to check out. The video shows a hitch from a different manufacturer being installed, but the hitch is similar enough to the one you referenced to give you a good idea of the placement. At the end of the vi
    view full answer...

  • Is Trimming or Modification Required to Install Curt Trailer Hitch 11749, 1998 to 2005 Mazda Miata
  • The Curt Class I Trailer Hitch, # 11749, should not require any rear fascia trimming or modification. The instructions do not list any steps for trimming, modification, and there are no notes regarding the receiver touching the rear fascia. I have included a link to the installation details for reference. I f you needed to trim the fascia, you can use a sharp utility knife (like a box cutter), score the area that needs to be trimmed, and in many cases, wiggling the piece back and forth will p
    view full answer...

  • Base Plates, Tow Bar, Wiring, Safety Cables, Braking System to Flat Tow a 2005 Mazda Miata
  • To flat tow your 2005 Mazda Miata you would first need Roadmaster XL Base Plates, # 711-4, that you have referenced. Please note these base plates will not fit the Mazdaspeed version of the Miata. Next, you would need a tow bar compatible with the XL style base plates, like the RoadMaster Falcon 2, # RM-520. I have included a link to the installation details and a video review for reference. To complete the towing set up for your Miata, you will need safety cables, lighting, and a supplementa
    view full answer...

  • Fastener Kit Needed for the Draw-Tite Trailer Hitch # 36501
  • The proper mounting hardware can be ordered for the Draw-Tite Class II Trailer Hitch, item # 36501, by using item # RHK, replacement hardware kit, in the search box and then entering the hitch item number and the hitch manufacturer in the boxes below the item description. I have also posted instructions for installation of this hitch below.
    view full answer...

  • Thule Roof Rack and Carrier for 2 Snowboards and Skis for a 2005 Mazda 3, 5-Door
  • For a rooftop carrier, you will need some sort of roof rack system. I checked on the Perrycraft roof racks and it is very difficult to tell from the images on the site if the racks we carry will fit. I spoke with my contact at Thule and she stated that they have never tested their carriers with the Perrycraft racks. She did state that the Thule racks will accommodate most factory racks, and if the cross bars Perrycraft offers are round or square and under 3 inches in diameter, then the Thule rac
    view full answer...





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com