customer service | view cart  View Cart


What our customers are saying:

I am very impressed with the excellent service and courtesy on handling the sale, keep up the good work Alfonso

Alfonso

Largo, FL

2000 Honda Accessories:

change make

Select 2000 Honda Model



Select Model for Your 2000 Honda



2000 Honda Accessories



2000 Honda Questions and Answers


  • What Parts are Needed to Tow a 2000 Honda Accord with a 37 ft Fleetwood Bounder Motor home
  • Whenever setting up a towing system, read and follow the guidelines listed in the emergency towing section of your owners manual. The five items you need to safely tow a 2000 Honda Accord behind your 2000 Fleetwood Bounder 37 ft. motor home are base plates for your Honda, a compatible tow bar, safety cables, lighting and a supplemental braking system. The base plate for your Honda is the Roadmaster XL # 1545-1. This base plate has removable arms that can be stored away when not in use. Th
    view full answer...

  • Has Hidden Hitch part # 70737 Been Replaced With Hidden Hitch part # 87479
  • I spoke with Hidden Hitch and you are correct:Hidden Hitch part # 70737 was obsoleted in 2009 and replaced with Hidden Hitch part # 87479. Hidden Hitch part # 87479 is form/fit/functionally the same as part # 70737. There are a few aesthetic differences between the two hitches, however, they are not visually noticeable.
    view full answer...

  • Spare Tire Mount Bike Rack Recommendation for a 2000 Honda CR-V
  • First, the adapter bars like # Y02531, would only be needed if the top frame bar on the bike does not go straight across or has an elliptical shape. I have included a link to a video that shows how it works. The Yakima SpareTime bike rack will fit your 2000 Honda CR-V if the tire size is between P195mm and 12.5 inch width. The cradles on the SpareTime are fixed and you may find that they are too close for some bikes. What I recommend is the Thule Spare Me, # TH963PRO. This rack will fit yo
    view full answer...

  • What Tow Bar Base Plates for Flat-Towing a 2000 Honda CRV
  • The Blue Ox Base Plate Kit, part # BX2221, is a correct fit for all models of the 2000 CR-V. I have forwarded the installation instructions in a separate email. Flat-towing a vehicle requires several components; these are outlined in the attached FAQ article. These include base plates, tow bar, safety cables, tow lights for the CR-V and usually a supplemental braking system. You will want to check state/local laws concerning flat towing a vehicle to ensure you are in compliance with all requi
    view full answer...

  • Bike Rack Recommendation to Carry a Recumbent Bike and a Regular Bike on a 2000 Honda Accord
  • The Hollywood Racks Sport Rider SE2 Bike Rack, # HR1450R, can carry one recumbent bike and one regular road bike at the same time without the need of an adapter. The only time you would need to add an adapter to this bike rack is to carry a trike. We may have a bike rack that will carry your recumbent bike and regular bike at the same time, but the Hollywood Racks SE2 bike rack is only designed to work with 2 inch trailer hitch receivers. The receiver on your trailer hitch is 1-1/4 inches an
    view full answer...

  • Parts Needed To Install Thule M.O.A.B. Roof Top Cargo Carrier # TH690 on 2000 Honda Odyssey
  • The Thule M.O.A.B. Roof Top Cargo Carrier, part # TH690, will require the installation of crossbars, that run from side to side, to your factory side rails on your 2000 Honda Odyssey. I would recommend the Thule Crossroads Roof Rack, part # THLB50, and part # TH450, or the Thule AeroBlade Crossroads Roof Rack, part # THARB47, and part # TH450R. Either one of these kits will give you the crossbars that are needed to attach the cargo carrier to the roof of your vehicle. The difference in th
    view full answer...

  • Could 2 Thule Hull-A-Port Kayak Carriers fit on Roof Rack of a 2000 Honda Odyssey
  • If you have a factory roof rack on your 2000 Honda Odyssey with crossbars that run from side-to-side, you will need to measure the length of the crossbars. The crossbars will need to measure at least 50 inches in length for you to be able to install two of the Thule Hull-A-Port Pro Rooftop Kayak Carrier, part # TH835PRO on your vehicle. If you do not have cross bars, or if they are not at least 50 inches in length I attached a link to a page that has all of the available roof racks for your v
    view full answer...

  • Fit of Yakima Spare Time # Y02598 on 2000 Honda CR-V
  • According to my contact at Yakima, the Spare Time # Y02598 is indeed a fit for the 2000 Honda CR-V. Two features I really like about the Spare Time- the rack can be mounted so that the arms are offset to the center of the rear of the vehicle, so that the bikes will be centered on the back of the vehicle. Also, the rack can be easily removed when not needed, leaving the mounting plate in place. To carry womens bikes or bikes with sharply angled top tubes or step-through frames, using a fram
    view full answer...

  • Cargo Carrier and 2 Inch Hitch Recommendation for a 2000 Honda Odyssey
  • I would recommend going with the Hidden Hitch Class III trailer hitch for you 2000 Honda Odyssey. This hitch installs easily, see video link, and will work well for carrying cargo on a cargo carrier. For a cargo carrier I have two recommendations. First, if you want the folding option like the one you selected, part # C18131, we only have one model that has a long enough shank to fold into the upright position on the Odyssey. The Draw-Tite Folding Cargo Carrier, # 6502, has 7-1/2 inches of cl
    view full answer...

  • Will the Thule Vertex Trailer Hitch Mount Bike Rack Fit a 2000 Honda Civic with a Class I Hitch
  • Thule does list the Vertex, # TH9028, as a fit for a Class I trailer hitch like # 24677 for the 2000 Honda Civic. I have included a link to the installation instructions for the trailer hitch for you to view. I have also included a link to a video review of the bike rack for you.
    view full answer...

  • Parts Needed to Flat Tow a 2000 Honda CR-V Behind a Motor Home
  • In order to flat tow your 2000 Honda CR-V, you will need to first add base plates. You can use the XL style base plates that you have referenced, # 1528-3. In order to use your Reese tow bar, # 63180, you will need to use an adapter, # RM-025, and quick disconnects, # RM-201. With this tow bar, you are limited to 45 miles per hour. I have included a link to the installation details for you. If you want to tow at highway speeds, you will need a different tow bar. I recommend the Falcon 2,
    view full answer...

  • Brake Controller 7 and 4 Way Installation Kit without the Pre-wired 7 and 4 way Trailer Connector
  • What you can do to complete the installation of the CURT 7-Way and install a Tekonsha P3, # 90195, is to use the Wiring Kit, # 5505 (for 2 and 4 trailer brake assemblies) or # 5506 (for 6 to 8 assemblies). You would also need one 40 amp circuit breaker for the 12 volt hot lead, # PK54540. You would still follow the FAQ and video for the # ETBC7 which I have linked for you. The Adapter 4 Pole to 7 Pole, # C57674, should have come with a mounting bracket and self-tapping screws so that you coul
    view full answer...

  • Will the Kuat Beta Bike Rack Fit on a 2000 Honda CR-V with Rear Mounted Spare Tire
  • The Kuat Beta bike rack, # B202-114, measures 10-1/2 inches from the center of the hitch pin hole to the back of the upright bar. This is the measurement that you need to determine if the bike rack will work on your CR-V. We installed a hitch on a 2000 CR-V with rear mounted spare tire, see photo, and the measurement to clear the spare was 6-1/2 inches. You should measure from the center of the hitch pin hole on your vehicle to the farthest out part of the spare to determine if your setup is
    view full answer...

  • Will the Thule Crossroad Roof Rack Kit Fit on the 2000 Honda Odyssey
  • Yes, the Thule Complete Crossroad Kit, # TH45050, will fit on the 2000 Honda Odyssey and provide cross bars for roof mounted accessories. The capacity of the roof on the 2000 Honda Odyssey is 110 pounds so you will need to keep the items mounted on the cross bars under that limit.
    view full answer...

  • How Does the Replacement Filter # D13092 Filter the Transmission Fluid
  • The Replacement Filter # D13092 that you referenced uses a paper filter element that the transmission fluid passes through to remove debris and metal dust.
    view full answer...

  • Trailer Hitch Recommendations for a 2000 Honda Passport
  • There are several Class III, 2 inch trailer hitches available for your 2000 Honda Passport. The correct hitch will depend on if the vehicle has the factory spare tire mounted on the back or underneath the vehicle. If the spare is under the vehicle, you can use the Draw-Tite Trailer Hitch, # 75093 that you have referenced. I have included a like to the installation instructions for you to view. If the spare tire is mounted on the rear door then you can use Draw-Tite Hitch # 75092. I have inclu
    view full answer...

  • What is the Difference Between Falcon All Terrain Tow Bar and Falcon 2 Tow Bar
  • The main advantage of the Falcon All Terrain Tow Bar, # RM-522, is that it will allow you to easily release the vehicle even if it is not level or at a difficult angle. In other words, you will not have to be perfectly straight and flat with this tow bar as it will not bind. The All Terrain version also features integrated cable channels to hold the cables up out of the way. The Falcon 2, # RM-520, has the potential to bind and you will want to be sure that you are as flat and straight as po
    view full answer...

  • Trailer Hitch Mounted Cargo Carrier Recommendation for a 2000 Honda Civic Coupe
  • There are several models of trailer hitch mounted cargo carriers that do fold up vertically when not in use, but the Draw-Tite Carrier, # 6500, does not. When not in use, you would have to remove it if you wanted to store it. Since all of the available trailer hitches for a 2000 Honda Civic Coupe are class I, 1-1/4 inch trailer hitches, you will need a cargo carrier that is compatible with a class I trailer hitch. We have 3 options, but none of them fold up. The Draw-Tite carrier is one that
    view full answer...

  • Recommendation for Power Steering and Transmission Coolers for a 2000 Honda Odyssey
  • You will need to measure the inner diameter of the lines to see if it will accept the 11/32 hose barbs on the cooler. If not, you may be able to use the Derale 3/8 Inch Hose Barb to 3/8 Inch Hose Barb Fitting, # D98028. It all really depends on what the inner diameter of the OEM hose is. I am fairly certain Honda also recommends a transmission cooler for towing as well. The transmission coolers we have listed for your 2000 Honda Odyssey come with and OEM spec hose and Insta-dapt radiator adap
    view full answer...

  • Parts Needed to Install an Electric Trailer Brake Controller on a 2000 Honda Odyssey
  • If your 2000 Honda Odyssey already has a 4-Way trailer connector, what you may be able to do is to route the connector through a grommet in the bottom of the cargo area and out to the trailer hitch where it will plug into the 4 and 7 Way Installation Kit, # ETBC7. You will need to make sure that you seal up any holes cut or drilled with silicone sealant to keep exhaust fumes and road grime from getting up into the cargo area of the vehicle. The ETBC7 provides all the wiring, circuit breakers,
    view full answer...

  • Recommendation for a Transmission Cooler For a 2000 Honda Odyssey
  • Some vehicle manufacturers require that an additional transmission cooler be used when you plan to tow with the vehicle. The owners manual will be able to give you the specific information on towing with your 2000 Honda Odyssey. Even if a cooler is not required, it is a good idea to add one to extend the life of the transmission and to avoid any potential problems associated with transmission fluid that is too hot. Transmission fluid cannot be overcooled, so adding a cooler is a good idea whe
    view full answer...

  • Are Adjusters, # PW100, Required when Using Snow Chain # PW1034
  • The Glacier Tire Chains for the 2000 Honda Accord, part # PW1034, are correct for your 2000 Honda Accord, and they do not require adjusters, but they are recommended. If you wanted adjusters you would need Glacier Rubber Adjusters for Class S Snow Chains - 1 Pair, part # PW100. They would make fitting and tightening the chains much easier and quicker. You should check the owners manual of your vehicle to make sure that your vehicle is capable of using tire chains. I have also included a
    view full answer...

  • Will the Hidden Hitch # 60907 Work with a Thule Helium Bike Rack on a 2000 Honda CR-V
  • The Hidden Hitch Class I Receiver Hitch, item # 60907, would be a good choice for your 2000 Honda CR-V. You will be able to use the Thule Helium Aluminum 3 Bike Carrier, item # TH971XT, on the CR-V as long as the measurement from the center of the hitch pin hole to the farthest out part of the spare tire is less than 6-1/4 inches. If the measurement on the CR-V is going to be longer than that, and I suppose it will be, the Helium rack would not fit properly. There are options though. One opti
    view full answer...

  • What is the Rola Platypus Rooftop Cargo Carrier # 59100 Made Of
  • The outside of the bag is a mesh rip stop style material infused with a rubberized coating, and the inside of the bag also has a rubber like lining. The impressive part is the thickness of the bag and the heavy duty zippers used. This bag also features padding in the bottom surface. The manufacturer will not give out the exact name of the material used but I went out to the warehouse and checked it out, I was impressed. The 3.6 out of 5 stars rating is the average customer rating. For this pa
    view full answer...

  • Trailer Hitch Installation Instructions and Ball mount, Hitch Ball, and Wiring for 2000 Honda CR-V
  • Yes, the Curt Trailer Hitch, # 13314, does come with installation instructions and the required mounting hardware. I have included a link to the installation details below. If you plan on doing some towing, the recommended ball mount is # 2753 and you can use hitch ball # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 19287 (2-5/16 inch diameter). For trailer wiring, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 118336, is the correct harness for your 20
    view full answer...

  • Recommended Hitch for 2000 Honda Accord 2 Door
  • The Curt Class I Receiver Hitch, part # C11290 is a fit for your 2000 Accord. If you were planning on using the hitch for an attachment point for a bike rack, keep in mind that the reinforcement strap part # 18050 must be used or else the manufacturer warranty will be void. Might I make a suggestion? The Draw-Tite part # 24791 or Hidden Hitch part # 60913 receiver available for your vehicle does not require a reinforcement strap and attach to the vehicle frame instead of the trunk pan which m
    view full answer...

  • Will the Cat Back Exhaust System for the 2000 Honda Accord Pass Emissions
  • The MagnaFlow Stainless Steel Cat-Back Exhaust System - Gas, item # MF15690, for the 1998 - 2000 Honda Accord L4 2.3L Sedan will pass emissions testing as long as the vehicle it is installed on is in proper running condition to pass the emissions testing for the state you live in. Emissions are improved by the catalytic converter and systems on the engine of the vehicle. The Cat-Back Exhaust System will in no way improve emissions of the vehicle.
    view full answer...

  • Replacement Hardware Kit Availability for Draw-Tite Trailer Hitch # 24790 for a 2000 Honda CR-V
  • Yes, we do have a hardware kit available for Draw-Tite Trailer Hitch # 24790. You will need part # RHK. Under the box that says Shipping Special, enter the hitch number (24790). Then select Draw-Tite from the manufacturer pull down menu. Next, click the Add to Cart button. That is all there is to it. I have also included a link to the installation instructions for this trailer hitch below.
    view full answer...

  • Is the SportRack Hitch and Cable Lock Long Enough to Secure All Three Bikes
  • Yes, the 37 inch cable on the SportRack Hitch and Cable Lock - Keyed Alike, item # A32022, is long enough to secure 3 bikes to the SportRack Escape 3 Bike Hitch Mount Folding Rack with Frame Mount Cradles, item # A30403. The included pin will be installed in the end of the drivers side arm and the cable and lock will be routed through the bike frames and secured to the pin in the end of the arm. The hitch lock will be secured to the anti-rattle hitch pin. We have a video which shows the insta
    view full answer...

  • Can the Boone Hang 2 For Thule, and Yakima Bike racks be used wtih the Softride Dura Rack
  • Yes, the Boone Hang 2 part # BH90H3FS is compatible with the Softride Dura bike rack. I tested this out with our display Dura rack. You will need to use the lower of the two upper pin holes on the bracket.
    view full answer...





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com