1993 Honda Accessories:

Select 1993 Honda Model

1993 Honda Accessories

Parts Needed to Flat Tow a 1993 Honda Del Sol Convertible Behind a Motor Home
I will be happy to help you pick out the right parts to flat tow your 1993 Honda Del Sol behind your motor home. But first, you will want to consult the vehicle owners manual to determine if it can be flat towed and if so if there are any special requirements. Base plate kit # 508-8 is the correct kit for all models of the 1993 Del Sol. You will need to trim the splash guard on the bottom of the vehicle (not visible unless you are down there looking for it) to fit around the base plate brack
view full answer...

Parts Needed to Flat Tow a 1993 Honda Accord with a Draw-Tite Tow Bar
If you have the Draw-Tite tow bar 2480 then you would need to use adapter # RM-025 to be compatible with Roadmaster base plates, # 1506-1. These base plates have fixed arms so they will always be present and visible. For a set that has removable arms and will not be visible, go with # 1526-3. But you would also need quick disconnects, # RM-201, to make them removable when using the adapter. With the base plates and the tow bar figured out, next you will need safety cables like # RM-643. The c
view full answer...

Which Grease Seal for LM11949 Bearing and LM11910 Race on Utility Trailer with No-Lug Hub
We do not have any grease seals that match your dimensions. When part numbers are not visible on the old grease seals taking measurements of the spindles themselves is the next best option. But if you took your measurements on the old grease seal this could be the reason for no match since the seals may become deformed over time. You will obtain more accurate measurements using a precision dial caliper on the spindles themselves. If you can re-check the spindle dimensions using a precisio
view full answer...

Roof Rack Recommendation for a 1993 Honda Civic 2 Door
The correct Q clips for a 1993 Honda Civic 2-door are Q69 clips, # Y00669, and Q70 clips, # Y00670. The Q Towers, # Y00124, will fit the round Yakima bars, like # Y00408. In order to add a center tower on each side of this system, you would use the Yakima Q Stretch Kit, # Y00134. This system increases the crossbar spread while providing support for vehicles with short roofs. I have included a link to the installation details for you to view.
view full answer...

Recommendation for Locking Bikes to Highland Sportwing Bike Rack and the Rack to a Trailer Hitch
In order to secure and lock the bikes and Highland SportWing bike rack, # 5801200 to a trailer hitch, you can use Hitch Lock with integrated Cable, # 1470DAT. You would loop the cable through the bikes, connect to the hitch pin, and then lock it. When the bikes are of the rack, you can remove the cable, stow it in the vehicle, and keep the lock on the hitch to prevent theft of the bike rack. I have included a link to a video review of this lock for you to view.
view full answer...

Installing Curt Class I Receiver Part # 11209 on 1993 Honda Civic Hatchback
To start, this hitch will require that 8 holes be drilled. Four holes in the spare tire well, and 4 in the underside of the bumper. You will need to temporarily remove the spare tire. Hold the hitch in place so that it is centered and square on the rear of the vehicle. The flat rectangular plate above the receiver opening will attach to the underside of the bumper beam and the fascia under the bumper will need to be notched so that the vertical support under the plate that attaches to the bum
view full answer...

Will Rola Sport Series Roof Rack With GT5 Mounting System Fit a 1993 Honda Civic Hatch Back
The part you were looking at, part # 59800, is for a 2009 Hyundai Elantra Touring. We have a package of 4 parts to assemble a roof rack on your 1993 Civic Hatch. The kit includes Thule Aero Feet, Load Bars, Mount Kit for the Feet, and Short Roof Adapter bars. I have included a link to the kit below.
view full answer...